Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 7 replies
  • Answers 1 answer
  • Subscribers 4 subscribers
  • Views 8330 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cannot connect to Webadmin from Outside using Port 4444

KHerzig

 Hi,

I've got a problem using our new Sophos Virtual appliance.

I can't connect to WebAdmin through the outside interface using port 4444.

Allowed networks is set to any. If I change the WebAdmin port to anything other for example 4443 it's working from inside and outside.

The issue started, after i created a D-NAT Rule using Port 4444 for our SUM.

I noticed my error (I wanted port 4422) but my fingers were faster than my brain...

I disabled and deleted the D-Nat rule for Port 4444. But Webadmin is still not working.

I restarted the appliance but nothing changed.

It's working on the inside interface using port 4444...

Can anybody help me with this issue?

 

Best regards,

Kai



This thread was automatically locked due to age.
Parents
  • 0

    Delete your dnat rule because I suspect you have auto packet filter rule generation enabled.

    Or alternatively enable the rule and change the port number.

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • 0

    Delete your dnat rule because I suspect you have auto packet filter rule generation enabled.

    Or alternatively enable the rule and change the port number.

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
Unfiltered HTML