Thread Info
  • State Verified Answer
  • +3 person also asked this people also asked this
  • Locked Locked
  • Replies 12 replies
  • Answers 2 answers
  • Subscribers 8 subscribers
  • Views 12135 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cisco VPN Client not route after update 9.409-9

tcassano

Hi,

i have updated my Sophos UTM SG310 to the version in subject.

Before i did the update I could get access on every network devices over Ipesc Cisco with the iPhone of my company.

Now after the update I'm not able to do it anymore.

The Connecting and the authentication are ok (VPN Connected) but I can't ping any device on any network (Request timeout).

SSL and PPTP works fine.

 

Can somebody help me about this issue ?

 

Tommaso

 



This thread was automatically locked due to age.
Parents
  • 0

    This latest update 9.409-9 also caused some issue on my VPN connection. However, I did solve it at last.

     

    This is what I did.

     

    Go to Network Protection - Firewall - Advanced turned off Block invalid packets

     

    Then go to Management - Backup/Restore & restore my configuration to 9.408-4.

     

    I'm not sure what is going wrong with this new firmware 9.409-9 but this is how I solve my VPN connection issue. You may give it a try if still can't get it solve. Hope can help.

Reply
  • 0

    This latest update 9.409-9 also caused some issue on my VPN connection. However, I did solve it at last.

     

    This is what I did.

     

    Go to Network Protection - Firewall - Advanced turned off Block invalid packets

     

    Then go to Management - Backup/Restore & restore my configuration to 9.408-4.

     

    I'm not sure what is going wrong with this new firmware 9.409-9 but this is how I solve my VPN connection issue. You may give it a try if still can't get it solve. Hope can help.

Children
No Data
Unfiltered HTML