This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IPv6 Router Advertisement seems to fail

Hello

I have a strange issue with my UTM. For now reason it seems like the Sophos stops broadcasting it's router role for IPv6. It simply stops routing IPv6 Prefix and even with a static assignment it is not routing any IPv6 Traffic anymore.

However: The problem seems resolved when I turn router advertisement off and on again (on any interface). But the problem reappears after about 4-5 days without any other changes to the UTM and it feels like this should not happen.

This happens with and without IPv6 DHCP.

This thread was automatically locked due to age.

Parents

Ben over 8 years ago

Hello,

i have reported IPv6 Problems to Sophos a few times (see https://community.sophos.com/products/unified-threat-management/f/management-networking-logging-and-reporting/78380/ipv6-in-broken-state)

its beeing ignored. IPv6 seems to be optional if it works or not right now for sophos.

---

Sophos UTM 9.3 Certified Engineer
Cancel
Vote Up 0 Vote Down

Cancel
Weatherlights over 8 years ago in reply to Ben

Crap... ok then just as an Information for the people who might be working on it:

The last bigger change I made was setting up upload balancing and multiple external gateways.
Cancel
Vote Up 0 Vote Down

Cancel
rfcat_vk over 6 years ago in reply to Weatherlights

Update on this issue, it still exists.

A renew of external interface does not update IPv6 connections. I might not have waited long enough after disabling IPv6 then re-enabling it to cause IPv6 update on the external interface. I restarted the UTM and the a new real external address was assigned.

This is the same issue as on the XG, so looks like there is a common driver issue that needs to be addressed. (just to add to Ben's complaint)

Ian

XG115W - v20.0.2 MR-2 - Home

XG on VM 8 - v21 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

rfcat_vk over 6 years ago in reply to Weatherlights

Update on this issue, it still exists.

A renew of external interface does not update IPv6 connections. I might not have waited long enough after disabling IPv6 then re-enabling it to cause IPv6 update on the external interface. I restarted the UTM and the a new real external address was assigned.

This is the same issue as on the XG, so looks like there is a common driver issue that needs to be addressed. (just to add to Ben's complaint)

Ian

XG115W - v20.0.2 MR-2 - Home

XG on VM 8 - v21 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data