Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 1 reply
  • Subscribers 3 subscribers
  • Views 1954 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Additional Addresses on LAN

JeffCooper

Hi,

I use a number of additional addresses on our WAN interface for various services, but I've never added one to my LAN side. I would like to change the LAN IP of my UTM to one that makes more sense (long story) and I think the best way would be to add the new address as an Additional Address, spend the next few weeks re-pointing clients and servers to the new address, then finally change the "real" address to the new address, thereby eliminating any significant downtime.

Is there something wrong with doing this, or anything I need to watch out for?


Thanks,


Jeff



This thread was automatically locked due to age.
  • 0

    Very creative solution, Jeff.  You should have no problem with that as long as the new IP isn't in a range that might be assigned to another device by your DHCP server.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Unfiltered HTML