Hello,
I'm looking to setup a separate Guest Wifi AP with direct Internet access with some QoS to limit bandwidth usage (We don't have the best upload, so it needs to be limited).
I've got a full private network with its own Wifi AP. However, we just acquired a second Apple Wifi Extreme AP, that I would like to use solely as a Guest Wifi AP.
Here is what I have done so far:
My UTM Has two unused Ethernet Ports.
I have setup one as a "Guest Network" Interface with an IP of 10.0.1.1 (My Internal network is a 192.168.x.x).
I have it directly wired to my Apple Extreme AP (ip: 10.0.1.2), I have setup DHCP on the AP for a range of 10.0.1.100-150, subnet 255.255.255.0, DNS 8.8.8.8 / 8.8.4.4, gateway 10.0.1.1.
I can connect with no problems, however I keep getting an IP from my INTERNAL DHCP server, instead of the AP.
I have tried setting a firewall :
Guest Network > Internal = DROP
Guest Network > Internet IPv4 = HTTP, HTTPS, SMTP SSL, DNS, allowed.
NAT: Guest Network (Network) > External (WAN)
Yet, after all this, I'm still able to see my internal network, and get an IP from my internal network.
How do I setup a separate interface to forward all traffic directly to the internet, and apply a QoS to that interface ONLY ?
This thread was automatically locked due to age.