Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 5 subscribers
  • Views 12055 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

2 of 4Vlans not working.

OldSchool

UTM425 
All DHCP is coming from the UTM. none use internal DNS, 

VLAN1 172.17.20.XXX works like it should wifi network for group1

VLAN2 172.17.30.XXX works like it should wifi network for group2

VLAN3 10.0.40.XXX no network access.. gets an IP/DNS, just wont connect to the iNet

VLAN4 10.0.50.XXX no network access.. gets an IP/DNS, just wont connect to the iNet

all 4 are set up identically in the UTM

Should they all on the 172.xxx networks? 



This thread was automatically locked due to age.
Parents
  • 0
    Please say why you conclude that 1 "works like it should" and that 3 has "no network access" and "wont connect to the iNet." What are you trying and what do you see?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    Please say why you conclude that 1 "works like it should" and that 3 has "no network access" and "wont connect to the iNet." What are you trying and what do you see?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
  • 0 in reply to BAlfson
    VLANS 1 and 2 have full internet access therefore it works like it should
    VLANS 3 and 4 work (by the networking definition--DHCP works-they get an IP, they get DNS, they get the gateway of 10.0.40.1 and .50.1 respectively). They have NO internet access.
Unfiltered HTML