This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Only 20 Mbit/s behind UTM120 on a 200 Mbit/s cable line

Before I moved to Mainz (where "Kabel Deutschland" is the only cable provider) I lived in Frankfurt (where I was using "Unitymedia") where I "only" had a 25Mbit/s line. Now I have a 200 Mbit/s line (with 10 Mbit/s upload) from "Kabel Deutschland". I was performing a speed test and only got out 20 MBit/s download - upload was fine with 10MBit/s. When I connected my laptop directly to the KD modem I got what I am paying: 200 MBit/s download and 10 Mbit/s upload. Any ideas why the UTM120 (v5) is not giving through the full bandwith???

Speedtest behind UTM 120 v5

Speedtest directly connected to cable modem



This thread was automatically locked due to age.
Parents
  • Depends on which features you are using.
    But generally, the UTM 120 is way to slwo for such fast speeds, esp. if you have IPS or web filtering turned on...

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Reply
  • Depends on which features you are using.
    But generally, the UTM 120 is way to slwo for such fast speeds, esp. if you have IPS or web filtering turned on...

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Children
No Data