Management, Networking, Logging and Reporting Slow Upload Speed UTM9 SG230

UTM Firewall requires membership for participation - click to join

Thread Info

Locked Locked
Replies 10 replies
Subscribers 9 subscribers
Views 39536 views
Users 0 members are here

Options

Suggested

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Slow Upload Speed UTM9 SG230

AnotherStranger over 8 years ago

Hi There,
We are currently experiencing an extreme slow upload rate with our SG230 UTM Version 9.351-3. (Base + Network Protection Subscription).

Download is fine with round about 86mbit/s but the upload is at 2-3 mbit/s at its best with our 100/100 connection.

I tried to turn IPS and the Advanced Threat Protection but with no success
Any suggestions where to look at?

Cheers,
Dave

This thread was automatically locked due to age.

Parents

johnHicks over 8 years ago

Were you ever able to resolve this? Im having the same issue. Running 9354-4. I get the same results even if i plug directly into the lan port on the firewall with my laptop.

Thanks,

John
Cancel
Vote Up 0 Vote Down

Cancel

Reply

johnHicks over 8 years ago

Were you ever able to resolve this? Im having the same issue. Running 9354-4. I get the same results even if i plug directly into the lan port on the firewall with my laptop.

Thanks,

John
Cancel
Vote Up 0 Vote Down

Cancel

Children

BAlfson over 8 years ago in reply to johnHicks

Hi, John, and welcome to the UTM Community!

Do you see indications in the logs mentioned in #1 in community.sophos.com/.../22065

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel
AnotherStranger over 8 years ago in reply to johnHicks

Hi John,

I know it's a bit late but yes.
We had an ARP resolution Issue with the Sophos SG210 UTM and our ISP.

What I've done was quite simple:
- Changing ARP resolution on our Fibre <> Ethernet Router from our ISP
- Setting the WAN Interface to 1GB ( second curious thing was that our SG set it after several reboots to 10M/100M while our Router was allowing 1GBs)

- Checking our routing to our ISP / beyond that.

So this was more like a ISP related issue ...
Cancel
Vote Up 0 Vote Down

Cancel
brett@evit.com.au over 8 years ago in reply to AnotherStranger

Out of interest is this only with Windows 7 machines?
Cancel
Vote Up 0 Vote Down

Cancel