Thread Info
  • Locked Locked
  • Replies 10 replies
  • Subscribers 9 subscribers
  • Views 39536 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Slow Upload Speed UTM9 SG230

AnotherStranger

Hi There,
We are currently experiencing an extreme slow upload rate with our SG230 UTM Version 9.351-3. (Base + Network Protection Subscription).

Download is fine with round about 86mbit/s but the upload is at 2-3 mbit/s at its best with our 100/100 connection.

I tried to turn IPS and the Advanced Threat Protection but with no success
Any suggestions where to look at?

Cheers,
Dave



This thread was automatically locked due to age.
Parents
  • QoS settings enabled (Interfaces & Routing -> QoS)?

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Reply
  • QoS settings enabled (Interfaces & Routing -> QoS)?

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Children
Unfiltered HTML