This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Finding whos connected to LAN and WAN

I'm using UTM 9 and was hoping someone would know the answers to the following questions that I have:

1) Where do I go in order to view whats connected to my LAN?
2) Where do I go to see who all is connected to my WAN?

I've been trying to find the settings in the lists but have yet to find any of them.

Thanks for the help in advance!

This thread was automatically locked due to age.

Parents

0 Scott_Klassen over 9 years ago

On the right hand side of the dashboard, you have a list of your interfaces. On the far right of each interface row, you have in and out boxes. Click on one of these to open Flow Monitor. Choose the Chart Tab.

__________________
ACE v8/SCA v9.3

...still have a v5 install disk in a box somewhere.

http://xkcd.com
http://www.tedgoff.com/mb
http://www.projectcartoon.com/cartoon/1
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Scott_Klassen over 9 years ago

On the right hand side of the dashboard, you have a list of your interfaces. On the far right of each interface row, you have in and out boxes. Click on one of these to open Flow Monitor. Choose the Chart Tab.

__________________
ACE v8/SCA v9.3

...still have a v5 install disk in a box somewhere.

http://xkcd.com
http://www.tedgoff.com/mb
http://www.projectcartoon.com/cartoon/1
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data