Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 2 subscribers
  • Views 16907 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Setup multiple WAN IP on eth1

gcraenen
Hello,

I'm new to the Sophos UTM, so sorry in advance for newby questions.

I have recently bought a Sophos SG135 and have some basics running (basic network and some vlans). All going to one WAN IP on eth1.

I can use several WAN IP from a x.x.x.240/29 range. The external WAN is now configured for one IP: x.x.x.242/32 with a default gateway of x.x.x.241. That's working ok.

What I want is to add the other possible WAN IP's as additional address on eth1. This seems simple: for instance add x.x.x.243/32 on eth1 without a default gateway setting. Anything I'm missing to make this work later on with connecting vlans to a specific WAN IP?


This thread was automatically locked due to age.
Parents
  • 0
    Anything I'm missing to make this work later on with connecting vlans to a specific WAN IP? 

    What do you mean by "connecting?"

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson
    I just created a separate thread about th issue I'm running into, to keep the rule "one item per thread" [:)]

    What do you mean by "connecting?"

    Cheers - Bob
Reply Children
No Data
Unfiltered HTML