Hi,
I'm a newby to the Sophos UTM's and just got one. I'm looking into setting up several vlans (tags 10 and 20) next to the standard vlan1 on eth0. What I want to accomplish:
1. I have several VM's running in a xenserver. At the moment they connect from a virtual/real nic to the LAN via a switch to the UTM and then to WAN (standard masq rule). Works fine now. WAN-IP x.x.x.242/29
2. On the WAN port of the UTM I can have several IP addr. from a x.x.x.240/29 WAN-range. I created additional IP's on the WAN network and enabled them. I can ping them from the "outside".
3. Created a vlan with tag 10 (vlan10 webservers), a dhcp server connected to that vlan10 and a masq. rule to valn10 --> WAN IP x.x.x.243/29
4. In xencenter created a new virtual nic on vlan10 and connected that to the webserver VM.
5. Due to cabling restrictions the vlans have to run on eth0, next to vlan.
The problem I encounter: the VM webserver is not getting an IP-addr. from the vlan10 dhcp server. The setup with ipaddr., dhcp server is equal to the standard setup off the basic vlan1.
Where can I find more help for this? The manuals do not give me a clue, just an explanation off the parameters in the GUI.
This thread was automatically locked due to age.
