This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos UTM after hardware modem/router

I might have missed a thread or two but I've been thorough and haven't been able to solve my problem - let me try:

My ISP have supplied me with a router(modem built-in) which is "don't touch", i.e. I cannot disable it's DHCP, I cannot disable it's NAT features, I cannot put it to bridge mode... nada!

But I've managed to convince them to direct all WAN traffic to a specific LAN IP address, 192.168.1.2 - let me outline:

- Router (192.168.1.1)
- Sophos WAN interface (192.168.1.2)
- Sophos LAN interface (192.168.2.1)
- Laptop (192.168.2.11)

My question is this: can I ever get Sophos set up to route WANLAN with the setup as above?

This thread was automatically locked due to age.

Parents

0 MadsBakholt over 9 years ago

As simple as that, eh? [;)]

It works... simply by following your explanations! [[:)]]

Thanks man, really appreciate your help! [[:)]]
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 MadsBakholt over 9 years ago

As simple as that, eh? [;)]

It works... simply by following your explanations! [[:)]]

Thanks man, really appreciate your help! [[:)]]
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data