This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to edit DNS groups?

Hello everyone,

I have an issue because I don't know how to edit my DNS groups.

To create DNS host definition it's ok, but I don't know how to add IP adresses to my definition.

How do you do it guys?

Thanks!

Regards,


This thread was automatically locked due to age.
Parents
  • You can't edit DNS groups. They are automatically filled by the IP addresses they resolve to...
    If you want to put several DNS hosts into a group use a network group instead.

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
  • You can't edit DNS groups. They are automatically filled by the IP addresses they resolve to...
    If you want to put several DNS hosts into a group use a network group instead.


    Ok so when you have a webserver with more than 1 public adress behind, you will have all the IPs resolved?

    So : 

    with a DNS host you have 1 IP
    with a DNS group you will have the IPs resolved from the hostname

    Sorry my english is bad.

    Regards,
Reply
  • You can't edit DNS groups. They are automatically filled by the IP addresses they resolve to...
    If you want to put several DNS hosts into a group use a network group instead.


    Ok so when you have a webserver with more than 1 public adress behind, you will have all the IPs resolved?

    So : 

    with a DNS host you have 1 IP
    with a DNS group you will have the IPs resolved from the hostname

    Sorry my english is bad.

    Regards,
Children
No Data