Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 2 subscribers
  • Views 5775 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DSL PPPoE Settings?

jalil1408
I have a DSL modem with Public IP (Internet).
My UTM is connected to the modem LAN interface. 

Which is best practice and how to create UTM External Interface?

1. Modem  
WAN: PPPoE
LAN: 192.168.10.1

UTM External Interface (This configuration works well)
Type: Ethernet
IP: 192.168.10.254
GW: 192.168.10.1 

Or

2. Modem
WAN: Bridge
LAN: 192.168.10.1

UTM External Interface
Type: DSL PPPoE
VDSL: ??? How to check if my ISP is offering VDSL service?
Static PPPoE IP: ???  Should this be the Public IP or 192.168.10.254? What should be the Netmask?
IPv4 Default GW: ??? Should I check this?


This thread was automatically locked due to age.
Parents
  • 0
    Hi,
    best practice is to have the modem in bridged mode and let the UTM setup the PPPoE connections. In theory the PPPoE software on the UTM will determine the connection type from parameters supplied at connection time.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • 0
    Hi,
    best practice is to have the modem in bridged mode and let the UTM setup the PPPoE connections. In theory the PPPoE software on the UTM will determine the connection type from parameters supplied at connection time.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
No Data
Unfiltered HTML