Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 15 replies
  • Subscribers 4 subscribers
  • Views 16310 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to request ipv6 prefix?

Remuflon
I have successfully gotten UTM started with IPV6 / Comcast.
They gave me a /64 prefix.

According to Comcast, to get a /56 prefix, just specify it in the IA_PD option.  But where do I do that with Sophos UTM?

9.313-3


This thread was automatically locked due to age.
  • 0 in reply to ben83
    Hi ben83,
    my UTM is talking directly to the ISP though a bridged modem.

    Attached is a screenshot of the IPv6 tab from the UTM.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk
    thanks for the screenshot! if your sophos is indeed making the PPPoE connection itself its quite interesting that it works for you.
  • 0
    Hi,

    For the record I also have the same info in my IPV6 screen, can post the screenshot if necessary.  This was after ticking the IPV6 default gateway on the WAN interface.

    Andrew.
  • 0
    I'm bumping this topic because we still cannot get a prefix from Comcast, even though we have ipv6 available and everything is ready to go.

    Comcast says: just put in your IA_PD attribute in your DHCP request and you are good to go.  But THERE IS NO IA_PD setting that I can find in Sophos UTM.  There is on the internal DHCP settings, but that's not going to help.

    The interface is "Ethernet".

    I have no problem SSH into the server and editing config files, if someone would point me in the right direction.
  • 0 in reply to Remuflon

    Has anyone been able to get around this?

Unfiltered HTML