This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to request ipv6 prefix?

I have successfully gotten UTM started with IPV6 / Comcast.
They gave me a /64 prefix.

According to Comcast, to get a /56 prefix, just specify it in the IA_PD option. But where do I do that with Sophos UTM?

9.313-3

This thread was automatically locked due to age.

Parents

0 adhodgson over 9 years ago

Hi,

Why are you trying to use NAT with IPV6? It is unnecessary and shouldn't be required as the UTM will filter traffic coming in and will drop if no rule exists.

You may want to see my message about setting up IPV6 in this forum as I did it last night and now have a working setup.

With your subnets are you trying to use them with different interfaces? If I need to do this I spoke to my provider and they can assign me multiple /64 subnets if required, these can then be made available to the different interfaces.

Andrew.
Cancel
Vote Up 0 Vote Down

Cancel
0 ben83 over 9 years ago in reply to adhodgson

what Remuflon is doing is a working workaround for a broken prefix delegation on the UTM. I have been using it that way more or less until now.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 ben83 over 9 years ago in reply to adhodgson

what Remuflon is doing is a working workaround for a broken prefix delegation on the UTM. I have been using it that way more or less until now.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data