I am still trying to navigate my way through transitioning to the UTM and a managed network. What an interesting experience so far!
Next on my list is multicast packet routing. My intended goal is to manage which VLANs and/or clients would be able to access which multicast-dependent devices/services multicast messages. One example would be allowing a Sonos to be controlled by a guest network - even though they are on different VLANs.
I have read that this challenge requires an RP Router - something that is brand new to me.
After some searching around online and within my Cisco SG200 switch, I am still confused as to whether I have everything I need to pull this off (other than the current know-how - which I know I don't have yet).
If anyone who is familiar with this topic and/or Cisco switches could help, it would be greatly appreciated.
Does the SG200-26 have what I need to work with the UTM to route multicast from one device or network to another device or network?
The manual is here and contains a "multicast" section. I am still trying to parse the information.
https://www.cisco.com/c/dam/en/us/td/docs/switches/lan/csbss/sf20x_sg20x/administration_guide/78-21139.pdf
This thread was automatically locked due to age.
