Hi,
I'm trying to get ipv6 working.
The dutch provider xs4all gives each end-user a /48 prefix ip addres space.
When I connect to this provider with a Linux box or fritzbox , it seems that I get a /64 prefix delegated for the lan.
However , with UTM , I can't get it working.
I tried with two recent versions of the software appliance
asg-9.109-1.1
asg-9.200-11.1
They're currently running on a esxi5.1 platform.
When using asg-9.109-1.1 , I get sometimes a /48 prefix delegated (visible in the ipv6 menu) but nothing is delegated to the lan interface , even I enter :: in it, or another address in the delegated subnet.
When using asg-9.200-11.1 , i'm getting no delegation at all.
Of course the automatic renumbering is active in both cases.
In all tests i've taken the time to timeout the previous delegation of the provider.
In all tests i've tested with two different wan setups. With or without VDSL active (just with or without vlan tag).
The behaviour is the same both are working fine with ip4v , and not with ipv6 pd.
I'm able to provide required logging whenever needed.
Kind regards,
Roel
This thread was automatically locked due to age.
