Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 13 replies
  • Subscribers 2 subscribers
  • Views 10495 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Force use of OpenDNS on my network

bblank
Noob question here...  feel free to point me to documentation.

What is the "best" way to force the users of my network to use OpenDNS?  

Firewall rules for the DNS Protocol?  DNS Forwarder?  Routing Profiles?

Thanks for advice, opinions and even random thoughts.

Bob.


This thread was automatically locked due to age.
Parents
  • 0
    Hi, a DNAT should be able to do it.

    Make a config backup first though.

    From: LAN Network(s)
    Dest: ANY
    Service: DNS (TCP/UDP 53)
    Change Dest to: Firewall internal address

    And configure the DNS settings in the UTM to use OpenDNS.


    However, I would first try DHCP settings combined with firewall rules blocking outgoing DNS.

    Barry
Reply
  • 0
    Hi, a DNAT should be able to do it.

    Make a config backup first though.

    From: LAN Network(s)
    Dest: ANY
    Service: DNS (TCP/UDP 53)
    Change Dest to: Firewall internal address

    And configure the DNS settings in the UTM to use OpenDNS.


    However, I would first try DHCP settings combined with firewall rules blocking outgoing DNS.

    Barry
Children
No Data
Unfiltered HTML