Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 10 replies
  • Subscribers 2 subscribers
  • Views 15028 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to Trunk Ports?

UweT
Hello There!

We are using a UTM425 Device and all ports are being used. We need to extend thge bandwith on some networks/VLANs and so this question comes up:

How can I trunk multiple ports to use it as a logical "bigger" line? Similar to HP switches and uplink ports in example.

Thank you in advance!
Uwe


This thread was automatically locked due to age.
Parents
  • 0
    It sounds good!
    We have done the same and it works (without the LACP configuration on the HP switches - HP A5500series).

    - adjust/configure the firewall rules (and anything else?)

    Normaly there are no more actions you have to do.

    Nice greetings
Reply
  • 0
    It sounds good!
    We have done the same and it works (without the LACP configuration on the HP switches - HP A5500series).

    - adjust/configure the firewall rules (and anything else?)

    Normaly there are no more actions you have to do.

    Nice greetings
Children
No Data
Unfiltered HTML