Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 10 replies
  • Subscribers 2 subscribers
  • Views 15024 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to Trunk Ports?

UweT
Hello There!

We are using a UTM425 Device and all ports are being used. We need to extend thge bandwith on some networks/VLANs and so this question comes up:

How can I trunk multiple ports to use it as a logical "bigger" line? Similar to HP switches and uplink ports in example.

Thank you in advance!
Uwe


This thread was automatically locked due to age.
Parents
  • 0
    Check docu on LACP configuration of both UTM and Switch. In the past we had some trouble connecting Cisco switches to 3Com switches using aggregated links, and though both were configured with LACP is had something to do with static or dynamic LACP if I recall correctly.

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

Reply
  • 0
    Check docu on LACP configuration of both UTM and Switch. In the past we had some trouble connecting Cisco switches to 3Com switches using aggregated links, and though both were configured with LACP is had something to do with static or dynamic LACP if I recall correctly.

    Managing several Sophos firewalls both at work and at some home locations, dedicated to continuously improve IT-security and feeling well helping others with their IT-security challenges.

Children
No Data
Unfiltered HTML