Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 16 replies
  • Subscribers 4 subscribers
  • Views 81873 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DHCP IPv4 - Clear client lease

viperz0r
Hi, 

I´m using UTM 9, and sometimes i need to clear (immediately) a specific client lease.

There is any way do that ? (Webadmin,console,SSH).


Thanks in advance,


This thread was automatically locked due to age.
Parents
  • 0
    Toggle a DHCP server disable/enable and the leases for that DHCP server are cleared.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    Toggle a DHCP server disable/enable and the leases for that DHCP server are cleared.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
  • 0 in reply to BAlfson
    Toggle a DHCP server disable/enable and the leases for that DHCP server are cleared.

    Cheers - Bob


    Dear Bob,

    Running UTM 9 Firmware version: 9.106-17 but no sulution here.
    I have to make the DHCP range smaller start/stop change it back and the it is cleard.

    Is there an other solution ? [:S]

    Regards,
    John
Unfiltered HTML