Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 27 replies
  • Subscribers 3 subscribers
  • Views 30061 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Multipath Rules vs Static Routing (Policy Routes) ?

UweT
Dear Experts,

We have 3x Internet access lines using Uplink Balancing.

We are using services for online file storage accessed by WebDAV (HTTPS) mostly.

I want do force all the traffic on HTTPS to destination i.e. "PROVIDER.com" to go over our dedicated line (same upload and download), let's call it "line1".

What is the best strategy in performance regarding the Astaro overload? And what is the difference in between?:

a) using Interfaces&Routing > Static Routing > Policy Rules (Any>Any>HTTPS>provider.com>interface "line1")

or

b) using Interfaces&Routing > Interfaces > Multipath Rules (Any>HTTPS>provider.com>line1)

Thank you in advance!
Uwe


This thread was automatically locked due to age.
Parents
  • 0
    On the Dashboard of WebAdmin, click on the 'In' traffic value for the interface you want to carry that traffic.  When the Flow Monitor appears, click on the number in the 'Clients' column for HTTP traffic.  Does that get you what you wanted to see?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    On the Dashboard of WebAdmin, click on the 'In' traffic value for the interface you want to carry that traffic.  When the Flow Monitor appears, click on the number in the 'Clients' column for HTTP traffic.  Does that get you what you wanted to see?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML