Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 38 replies
  • Subscribers 3 subscribers
  • Views 49479 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM9 with VMWARE

stevey_uk
Good afternoon,

Can you help me please. I'll try and keep this brief and to the point.  I am a home using looking to use the UTM 9.

Question - What do I put under WAN setting please?

Setup >

LOUNGE
SKY ISP Fibre Pro
Router = Billion 8800NL
Switch
long lead going to Office
several leads going to tv, sky box, games console

OFFICE

Server Rack
Switch
lead to 1 physical ESXI HP Server
HP Server running several VM's one of which is UTM 9
lead going to sky box in office, wifi AP, and other bits n bobs

Network Config

Flat lan all on same subnet
First hop in router = 192.168.0.1
Gateway = router address
DNS = router address
Sophos nic 1 = LAN 192.168.0.100
Sophos nic 2 = not configured

I hope I have outlined clearly and posted what you need.  Thank you.

Steve.


This thread was automatically locked due to age.
Parents
  • 0
    They don't recommend it, but more people are using their own especially people who came over from 'BE THERE' ISP who mainly had their own routers.

    I think I'm going to start again, with 2 leads.  to and from the garage.
Reply
  • 0
    They don't recommend it, but more people are using their own especially people who came over from 'BE THERE' ISP who mainly had their own routers.

    I think I'm going to start again, with 2 leads.  to and from the garage.
Children
  • 0 in reply to stevey_uk
    They don't recommend it, but more people are using their own especially people who came over from 'BE THERE' ISP who mainly had their own routers.

    I think I'm going to start again, with 2 leads.  to and from the garage.


    Hi

    A little feedback on how you are doing would be appreciated.

    Aimee
Unfiltered HTML