Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 38 replies
  • Subscribers 3 subscribers
  • Views 49457 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM9 with VMWARE

stevey_uk
Good afternoon,

Can you help me please. I'll try and keep this brief and to the point.  I am a home using looking to use the UTM 9.

Question - What do I put under WAN setting please?

Setup >

LOUNGE
SKY ISP Fibre Pro
Router = Billion 8800NL
Switch
long lead going to Office
several leads going to tv, sky box, games console

OFFICE

Server Rack
Switch
lead to 1 physical ESXI HP Server
HP Server running several VM's one of which is UTM 9
lead going to sky box in office, wifi AP, and other bits n bobs

Network Config

Flat lan all on same subnet
First hop in router = 192.168.0.1
Gateway = router address
DNS = router address
Sophos nic 1 = LAN 192.168.0.100
Sophos nic 2 = not configured

I hope I have outlined clearly and posted what you need.  Thank you.

Steve.


This thread was automatically locked due to age.
Parents
  • 0
    Hi,

    Billion have come back to me and said I could create a DMZ.

    The only option is to enable DMZ to the WAN IP of the Sophos UTM. (so enable DMZ on the 8800 and enter the WAN IP of the Sophos UTM in the DMZ section)

    However I am unsure which method of connection I would select within the UTM? Can anyone help please?
Reply
  • 0
    Hi,

    Billion have come back to me and said I could create a DMZ.

    The only option is to enable DMZ to the WAN IP of the Sophos UTM. (so enable DMZ on the 8800 and enter the WAN IP of the Sophos UTM in the DMZ section)

    However I am unsure which method of connection I would select within the UTM? Can anyone help please?
Children
No Data
Unfiltered HTML