This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

vlans dhcp

how do i configure sophos to do dhcp on different vlans. i want to add 3 vlans in our network ex 192.168.1.0/ 24 192.168.2.0/24 and 192.168.3.0 /24 can sophos do dhcp for those blocks. we are using layer 2 switches. also can sophos detect vlans let say port 1 on my switch is vlan 10 and i just change the vlan on the switch to vlan 20 and sophos would know what ip address to give it.

This thread was automatically locked due to age.

0 rfcat_vk over 9 years ago

Hi,
UTM 9 can do as many VLANs (about 250 from memory) on the one interface. You setup a vlan type interface and then create a dhcp server for that vlan becomes a selectable object from the drop down list. You setup the connection to the UTM 9 as tagged and all other ports as untagged within the vlan.

Works well.

Ian M

XG115W - v20.0.2 MR-2 - Home

XG on VM 8 - v21 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel
0 christenlai over 9 years ago

once this is setup on the sophos side i can just change vlans on the switch and sophos would give out the right address?
Cancel
Vote Up 0 Vote Down

Cancel