This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos UTM in HA stopped working after rebooting ESXi host

Hello All.

We have 2 ESXi servers set up with Sophos UTM in active-passive mode.
After rebooting the ESXi server with the slave node, at first the slave node appeared dead in the management interface.
After a while, the dead node disappeared from the interface and I got disconnected.

After logging in again, I notice that I'm accessing the original slave node and it has now taken over the master role.
This repeats every 30 seconds or so, with the 2 nodes fighting with each other over the master role.

Trying to set up HA again in the interface is not working and I'm not really sure what to do?

Anyone got any idea or advice on how to solve this?



This thread was automatically locked due to age.
Parents
  • Seems the HA link is broken...

    Open HA live-log at the master and reboot the slave.


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Reply
  • Seems the HA link is broken...

    Open HA live-log at the master and reboot the slave.


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Children
No Data