This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Exception is not working when I specified user or group

Hello, can you help me with this problem please? 

This is how look our Default Web Profile:

 

This is how look our custom profile for OU - InternetFree - skryja is part of this group.

Exception is not working when I specified user or group:

Do you know where could be the problem? When I skip Authentification, the exception starts working.



This thread was automatically locked due to age.
Parents
  • You cannot have two profiles using the same network and filter mode.   The first one to match will be the only one used.   So one or the other of these will never be used.

    Standard Mode profiles apply only to devices that have proxy settings configured.   Transparent Mode profiles capture both standard and transparent traffic (undocumented feature).   So if you are using both Standard and Transparent mode profiles, you want the Standard Mode profiles to appear first.   I recommend using Standard Mode with authentication and Transparent Mode without authentication.

    You do not show a Transparent Mode filter, so any device that does not have the proxy configuration will bypass all authentication.   So you need to investigate whether the device has the Standard Mode settings configured.

  • Good point, I disabled the Profile1 and keep just default, Standard Mode with AD SSO authentifiacation. 

Reply Children