Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 5 subscribers
  • Views 1277 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos - STP TC (TOPOLOGY CHANGE) flood from WIFI APX device

MysteriousDT

Hi!

I'm getting STP TC flood messages from Sophos APX-530 on the switch side.

Is there any advanced STP settings on the AP side?



This thread was automatically locked due to age.
Parents
  • 0

    Hi Tamas,

    do you actively use STP in your network?

    The only thing you can edit at the "Access Points" object level in "Wireless Protection" is enable or disable STP.

    So if not using STP, I recommend disabling it there.

    Otherwise, you should check your STP topology.

    Mit freundlichem Gruß, best regards from Germany,

    Philipp Rusch

    New Vision GmbH, Germany
    Sophos Silver-Partner

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • 0

    Hi Tamas,

    do you actively use STP in your network?

    The only thing you can edit at the "Access Points" object level in "Wireless Protection" is enable or disable STP.

    So if not using STP, I recommend disabling it there.

    Otherwise, you should check your STP topology.

    Mit freundlichem Gruß, best regards from Germany,

    Philipp Rusch

    New Vision GmbH, Germany
    Sophos Silver-Partner

    If a post solves your question please use the 'Verify Answer' button.

Children
No Data
Unfiltered HTML