All my devices such as UTM, switches and wifi APs are on management vlans on L2 switches with addresses in the management subnet. All the tagging is on switches and I have not created any vlans on the UTM.
I have been advised earlier that for security reasons it is good practice not to enable and wifi access to the management subnet so when needed I plug a patch cable between the UTM management port and the vlan management port on the switch. My problem is that for long periods in future I may not have physical access to the UTM so using a cable is not practicable. What is correct way to resolve this please.
A supplementary problem related to this is that when I try and set the management port address to a vlan the switch refuses this setting as it will lose in-band connectivity. How do I set the switch with a vlan to start with?
This thread was automatically locked due to age.