Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 3 subscribers
  • Views 1444 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AWS Direct Connect - BGP - Routing certain traffic / IPsec VPN Failover

Phreeze

Have a fractional Direct Connection to AWS via Spectrum. Must use BGP to make the connection to work. Having difficulty finding help in getting this working but once it is working how would one configure it so that if the BGP connection were to fail then it would failover to a IPsec VPN tunnel to our UTM on our VPC ?

 



This thread was automatically locked due to age.
Parents
  • 0

    Is there a reason to not use the direct connection along with your other connection in an Amazon VPC connection?  That is a redundant connection with instant failover.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0

    Is there a reason to not use the direct connection along with your other connection in an Amazon VPC connection?  That is a redundant connection with instant failover.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML