We are (mostly) replicating a UTM config for a client moving locations. For a time, both sites will have a UTM in place. I restored the config from the current site UTM to the new, and am working on the minor changes required. However, I cannot disable Sophos UTM Manager under Management > Central Management as it says "Licensing Info - Deactivation of Central Management, changing of SUM host and features are disabled as MSP Licensing is activated!".
I changed the hostname, rebooted, connected to the internet and can access the new UTM on the external address.
The new UTM never appears in the SUM for activation/Licensing.
To remove any issues of duplicate UTMs reporting to the SUM, I Reset the config on the new UTM and started again, even using a new fqhn for the hostname. The result was the same as if the SUM is now not able to accept new UTMs.
The Device Agent Log on the UTM shows:
device-agent[5371]: 1 is not connected. Trying to connect
device-agent[5371]: Updating SUM IP address for path: acc/server1/server
device-agent[5371]: [1] Connecting to SUM (ip=<SUM IP>, port=4433).
device-agent[5371]: [1] Using SUM SSL connection.
device-agent[5371]: [1] We are now connected (ip=<SUM IP>, port=4433).
device-agent[5371]: SUM ehlo notification from [1]
device-agent[5371]: Found SUM version 4.309009. Treating it as release 4.3.
device-agent[5371]: Full SUM support is granted as the current SUM version isn't lower than the minimal required SUM version of: 4.2
device-agent[5371]: [1] Received 0 bytes (eof).
device-agent[5371]: timer2 -> module 1 not executing: denied by role
device-agent[5371]: timer2 -> module 2 not executing: denied by role
device-agent[5371]: timer2 -> module 3 not executing: denied by role
device-agent[5371]: timer2 -> module 4 not executing: denied by role
device-agent[5371]: timer2 -> module 5 not executing: denied by role
device-agent[5371]: timer2 -> module 6 not executing: denied by role
device-agent[5371]: timer2 -> module 7 not executing: denied by role
device-agent[5371]: timer2 -> module 1 not executing: denied by role
device-agent[5371]: timer2 -> module 2 not executing: denied by role
device-agent[5371]: timer2 -> module 3 not executing: denied by role
device-agent[5371]: timer2 -> module 4 not executing: denied by role
device-agent[5371]: timer2 -> module 5 not executing: denied by role
device-agent[5371]: timer2 -> module 6 not executing: denied by role
device-agent[5371]: timer2 -> module 7 not executing: denied by role
device-agent[5371]: 1 is not connected. Trying to connect
Which then just repeats.
For a short time, the UTM showed connected to the SUM, in the "SUM Health" pane, but that changed to not connected (red circle/cross).
Any thoughts or suggestions on how to get this UTM connected, or how to further diagnose the issue?
Thanks
Bob E.
This thread was automatically locked due to age.
