Does anyone know if Port 9980 is important?

Thanks Doug,

The reason I brought it up, was because I noticed the IP Addresses that were affected were from the Sophos Interface section. For an example 10.5.1.1

if you have NMAP, run this line:

nmap --script ssl-enum-ciphers -p 9980 10.5.5.1

(You'll have to change the IP address of course.)

and then you'll see the results if you're affected or not.

Thanks Doug,

The reason I brought it up, was because I noticed the IP Addresses that were affected were from the Sophos Interface section. For an example 10.5.1.1

if you have NMAP, run this line:

nmap --script ssl-enum-ciphers -p 9980 10.5.5.1

(You'll have to change the IP address of course.)

and then you'll see the results if you're affected or not.

This post has everything that I could assemble about UTM port usage, and 9980 is not in my list. 

https://community.sophos.com/products/unified-threat-management/f/general-discussion/100848/how-to-understand-utm-port-usage

However, many of the default ports can be overridden, so perhaps your configuration has been customized by a prior network administrator. 

Please ask Sophos Support to help you figure it out.  If the port is used by default, please reply to that posting with details of where the port is typically used.