Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 2 subscribers
  • Views 5917 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Throttle Shape Flow view

NickFawcett

I have an interesting find.  When I click on the interface from the dashboard to bring up the flow view, I noticed that the "Block, Shape, Throttle" buttons are grayed out.  I had a friend see if he had the same thing on his home deployment and his buttons are clickable to create profiles.  Anyone have any ideas?



This thread was automatically locked due to age.
Parents
  • 0
    Are you clicking on the "All" interface? If so, that makes sense because the UTM doesn't know what interface you want to shape. Try clicking on your "eth0" or "eth1" interfaces.

    --------------------
    Private: 1 Mini ITX (EMB-CV1), Atom D2550 1.86 GHz Dual Core CPU, 8GB RAM, UTM 9.3 Home License, AP100
    Business: 2 UTM320 in HA (Active/Passive), Full Guard, 7 AP50's, 1 AP100

Reply
  • 0
    Are you clicking on the "All" interface? If so, that makes sense because the UTM doesn't know what interface you want to shape. Try clicking on your "eth0" or "eth1" interfaces.

    --------------------
    Private: 1 Mini ITX (EMB-CV1), Atom D2550 1.86 GHz Dual Core CPU, 8GB RAM, UTM 9.3 Home License, AP100
    Business: 2 UTM320 in HA (Active/Passive), Full Guard, 7 AP50's, 1 AP100

Children
No Data
Unfiltered HTML