This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

add 2 more LAN's to go out firewall and use HTTP/HTTPS web inspection?

Hi,

If I am using 192.168.0.0/24 and I have two neighbors 192.168.61.0/24 and 192.168.62.0/24 are there a LOT of places in the UTM 9.3 product I have to create this network and broadcast and link them to the firewall or web filter rules?

Thanks,

Joe



This thread was automatically locked due to age.
Parents Reply Children
  • Also as you have indicated that these are LAN's (ie Internal).
    What I do is create a Group called Internal Access Group. Add all the Internal networks to this group.
    Them you only have to have one masq rule with this group, one entry for DNS, also you can make common firewall definations across networks.
    For Firewall Rule's I make a OK Group with all the common rules in one group.

    Hope this helps

    Mark

    Testing since 2003

    SG 310 home use

    Retired with Cancer

    Can be contacted for those bits too hard for anybody else.

    Plan to travel remote Australia to raise awareness of prostate cancer.

    Have you had your PSA level checked lately.

    Enjoy live you never know what is around the corner.

    Cheers

    Mark

  • Scott,

    I looked to see if I could make a trunk port and have multiple VLANs on one interface. It looks like the old code for UTM 9 does not support TRUNKS?

    Thanks,
    Joe
  • It's called Link Aggregation (LAG) in Sophos UTM.

    /talex

    - 21 is only half of the truth

  • Scott,

    Rather than dig a big hole in the old product I think I am going to just start with XG and figure out how to do everything there as that is the future of the product.

    Thanks,
    Joe