This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM 9 - Bandwidth usage report

Hi folks,

I'm quite new with the UTM OS and I looking for a bandwidth report that can help me understand if the bandwidth provided by my ISP is enough or not.

I found the Network Usage section in the UTM pretty useful but looking at the chart and the table, something doesn't add up: as you can see below, the chart is showing a peak of 20.41Mbps as maximum bandwidth consumpion but, If I see the table below it, the max usage stops at 245Mbps. Same thing for the  external interface.

Am I reading it wrong? Can it be somethig related to the log retention (which I set to 90 days - the maximum available)?

Thanks in advance

Renato



This thread was automatically locked due to age.
  • Ciao Renato and welcome to the UTM Community!

    The daily graph shows 5 minute averages, so I assume the monthly shows 2.5 hr. averages.  The listed maximum is instantaneous.  Apparently, your service is 240/80 Mbps.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • Hi Bob, thanks for the explaination.

    My ISP bandwidth should be 300/150 Mbps: if I'm getting this right, it means that I not at capacity but almost, yeah?

  • Depending on the number of CPU cores and their speed, you should be able to fill your pipe.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA