Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 3 subscribers
  • Views 45248 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How do I create a Bridge, LTE (4G) to Ethernet?

nicnet

I have been using a Dovado Pro (in bridge mode) with a Huawei E3276 for some years and my internet connection use to drop up to 10 times/day.
Reconnecting took up to 10 min.

I just changed to UTM 9 and now my USB modem is quite stable.
Reconnecting only takes a couple of sec.

Next step is to bridge my Huawei E3276 to an Ethernet interface.
I can't seem to find a guide for this.

Just to clarify; the LTE connection is my only internet connection. This is not to be used as fail-over.

I have 2 unused Ethernet interfaces available thanks to the upgrade the other day.
StarTech.com part# USB31000SW
USB-to-Ethernet Gigabit based on ASIX AX88179.

Anyone?



This thread was automatically locked due to age.
Parents
  • 0
    So you are trying to get your LTE USB dongle to work as an ethernet device on the UTM?

    --------------------
    Private: 1 Mini ITX (EMB-CV1), Atom D2550 1.86 GHz Dual Core CPU, 8GB RAM, UTM 9.3 Home License, AP100
    Business: 2 UTM320 in HA (Active/Passive), Full Guard, 7 AP50's, 1 AP100

Reply
  • 0
    So you are trying to get your LTE USB dongle to work as an ethernet device on the UTM?

    --------------------
    Private: 1 Mini ITX (EMB-CV1), Atom D2550 1.86 GHz Dual Core CPU, 8GB RAM, UTM 9.3 Home License, AP100
    Business: 2 UTM320 in HA (Active/Passive), Full Guard, 7 AP50's, 1 AP100

Children
Unfiltered HTML