Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 3 subscribers
  • Views 3579 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Static Route from WLAN to Print Server over VPN

Tam Ben-Jusu

I need to allow clients on a WLAN (192.168.4.0/24) to see a remote print server (192.168.0.17/24) on another site.

The sites are connected via a wan-to-wan VPN.

Can I create a static route?

And then a firewall rule?

Any help would be greatly appreciated.

 



This thread was automatically locked due to age.
Parents
  • 0

    Hi Matthew and welcome to the UTM Community!

    I bet you meant to post this in the XG Community.

    In the UTM, if you've established a site-to-site connection with automatic firewall rules, the client just need to know the IP of the printer.  I suspect the same is true in XG.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0

    Hi Matthew and welcome to the UTM Community!

    I bet you meant to post this in the XG Community.

    In the UTM, if you've established a site-to-site connection with automatic firewall rules, the client just need to know the IP of the printer.  I suspect the same is true in XG.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML