Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 6 replies
  • Answers 1 answer
  • Subscribers 4 subscribers
  • Views 6895 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

open vpn log

AreshAreshi

Hi Guy's,

We have setup VPN SSL on our utm SG310 and we can access the network behind the UTM with openssl vpn software.

Today I was checking the logs and we can see that since the VPNSSL is enbaled, in the logs under Network usage- Top clients by category- VPN and Tunnelling our own IP address and many other IPs like:

crawl-66-249-64-83.googlebot.com 332MB

 

Shouldn't we see only the IP address that have VPN connection to the utm? after all you must have user name and password and also a certificate to access the VPN

 

Thanks



This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to AreshAreshi

    Hi Aresh,

    you don't use a 10.0.10.0 range as you have described it. You use the default Pool 10.242.2.0/24.

    For that, the Report "Top clients by category- VPN and Tunnelling" with the external addresses has nothing to do with your SSL VPN Clients.

    Regards mod

Children
  • 0 in reply to mod2402

    Hi mod,

    Sorry, my mistake, the 10.0.10.0 is the LAN and as you mentioned the dhcp pool is 10.242.2.0/24

    when we disable the SSl VPN then we dont see the external address in the logs! question remaing is why we see them under the SSL vpn tunnelling logs?

     

    Thanks

Unfiltered HTML