Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 12 replies
  • Subscribers 1 subscriber
  • Views 6167 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Need help with mail server please

JamesSteen
I have to get mail to my server but I also need to allow the mail to come in from certain IP addresses such as 54.191.214.3  54.149.210.130. 25 or so to type in. Am I adding these from "Network Definitions" "Group" "????" "????"  please give me some help thanks. I will also need help with S - D NAT afterwards.

I am adding through 
Network Definition
Host
IP 123.456.789
Then adding the domain in DNS with reverse lookup on
pmta1.delivery10.ore.mailhop.org

Let me know if this is correct please.


This thread was automatically locked due to age.
Parents
  • 0
    Create a network object of type "Host" for every IP. Then create a network group and put all those created hosts in it.

    Now go to Email Protection -> SMTP -> Relaying and put this group in "Upstream Hosts/Networks".

    Und "Host based relay" you put your internal mail server.

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Reply
  • 0
    Create a network object of type "Host" for every IP. Then create a network group and put all those created hosts in it.

    Now go to Email Protection -> SMTP -> Relaying and put this group in "Upstream Hosts/Networks".

    Und "Host based relay" you put your internal mail server.

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Children
No Data
Unfiltered HTML