This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SPX seems not to be working with a Home license

I'm setting my own (private) email server and was testing SPX Email Security.
But it isn't working?! It looks like SPX is not supported...

I followed the instruction How to Configure Email Encryption with SPX on the Sophos UTM

I can enable SPX but when I send an e-mail with in the subject [secure:thepassword] but the content of the e-mail is not "catched" by SPX and does not send an e-mail with a password protected PDF. Also the SPX Portal is not accessible...

Does the Home License support SPX bij default or not?

cheers,

Fobe

This thread was automatically locked due to age.

0 BarryG over 9 years ago

Hi,

UTM version #?

The only features I know of that aren't supported in the home user license are:
a. some VPN clients
b. active-active clustering
c. customization of user-visible text messages (proxy warnings, etc.)

Barry
Cancel
Vote Up 0 Vote Down

Cancel
0 Scott_Klassen over 9 years ago

It should work. Most likely a configuration issue.

__________________
ACE v8/SCA v9.3

...still have a v5 install disk in a box somewhere.

http://xkcd.com
http://www.tedgoff.com/mb
http://www.projectcartoon.com/cartoon/1
Cancel
Vote Up 0 Vote Down

Cancel
0 PabloDiablo over 9 years ago

Thank you all for responding!
Could it be my license version? My license has version V7.
If that's that's the problem, how can I upgrade the license to V9?
Cancel
Vote Up 0 Vote Down

Cancel
0 trollvottel over 9 years ago

To upgrade a home license, login to myutm.sophos.com and delete it in the portal. Then you can create a new one right there.
Cancel
Vote Up 0 Vote Down

Cancel
0 PabloDiablo over 9 years ago

Hi Trollvottel,
I deleted the license and created a new one.
But none of the services, like Network Protection, Email Protection, Web Protection etc.,
is active....
Cancel
Vote Up 0 Vote Down

Cancel
0 PabloDiablo over 9 years ago in reply to PabloDiablo

Call me stupid, but I can't get it working [:(]
I followed the instructions as following How to Configure Email Encryption with SPX on the Sophos UTM.
I configured the Zimbra server to relay on the UTM 9.3 . I see the mail going through the spool in Mail Manager. I set in the SPX template to generate an one-time password for every mail and still the mail is send NOT encrypted (or an encrypted PDF).
Also the SPX Portal (port 10444) is not accessible... this is driving me craxy!
Any suggestions what I miss configured?

edit: I made a DLP rule to use SPX when a "magic" word is used, now I see in the mail spool "SPX encrypted" and the receiver receives an e-mail with the PDF. But when the receiver want to reply to it, he's redirected to the UTM on port 10444 it isn't active...
Cancel
Vote Up 0 Vote Down

Cancel