Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 1 subscriber
  • Views 5193 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Email routing based on sender email

testerq12431231
I am migrating from some Sophos Email Appliances to the UTM.  One issue I seem to have is that I am unable to see where to apply rules based on internal sender email addresses.

Previously in the Web Appliance we used the following routing rules for internal users.

The internal users had 2 email addresses, one not private that should always route over the internet and another private that would always route via a private network host

eg.
sender:user@private.com - route via private 10.x.x.x(host) network
sender:user@notprivate.com - route via External Internet

There doesn't appear anywhere to configure this within the UTM.

I don't want to route based on receipient domain but the sender domain

Any ideas?


This thread was automatically locked due to age.
Parents
  • 0
    Haven't tried this, but perhaps with different Mail Protection profiles?

    edit: OK, tried it, not a working solution.

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Reply
  • 0
    Haven't tried this, but perhaps with different Mail Protection profiles?

    edit: OK, tried it, not a working solution.

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Children
No Data
Unfiltered HTML