This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Routing of Mailprotection

Hello together,

I have eth1 with an additional (public + static) IP.

Is it possible to bind SMTP of mailprotection on this second IP?

Thank you very much.


This thread was automatically locked due to age.
Parents
  • You can't change how it's bound (I assume you want to control this mostly for outbound mail purposes)... something I've asked for the ability to control for years.  If you need to force traffic outbound from the UTM to use a specific additional IP, you'll need to create a SNAT rule (I've worked around the issue in this manner before).

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Sophos Platinum Partner

    --------------------------------------

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

Reply
  • You can't change how it's bound (I assume you want to control this mostly for outbound mail purposes)... something I've asked for the ability to control for years.  If you need to force traffic outbound from the UTM to use a specific additional IP, you'll need to create a SNAT rule (I've worked around the issue in this manner before).

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Sophos Platinum Partner

    --------------------------------------

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

Children
No Data