This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Active Sync Connection to Exchange 2003

I have a new Blackberry Q10 and I cannot get the Active Sync to connect. I am using UTM 9, latest version. I have been running OWA for years to my Exchange 2003 sever and a BES, the BES and Exchange are both VM on a 2008 R2 server.
Port 80 is pointing to a website on the 2008 server, 443 is pointed to Exchange for OWA. My DNS points to my UTM and is forwarded to exchange. I have added a second MX setting with a 20 cost to my DNS to point to the Exchange server.

What settings need to be made to allow Active Sync to connect to the Exchange server through the firewall?

Thanks in advance

This thread was automatically locked due to age.

Parents

0 gilipeled over 11 years ago

Hi ,

You can do it in 2 ways.
One :
Use NAT and packet filter rules to allow the relevant ports to the internal servers.

Two:
Use the UTM WAF module to configure it.
Add the external virtual server with the correct certificate ( usually you meet to upload them to the UTM)
And add the internal real servers.

In both ways it should work.

All my best ,
Gilipeled

Gil Peled.

CEO- Expert2IT LTD.

SOPHOS Platinum Partner.

Gil@expert2it.co.Il.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 gilipeled over 11 years ago

Hi ,

You can do it in 2 ways.
One :
Use NAT and packet filter rules to allow the relevant ports to the internal servers.

Two:
Use the UTM WAF module to configure it.
Add the external virtual server with the correct certificate ( usually you meet to upload them to the UTM)
And add the internal real servers.

In both ways it should work.

All my best ,
Gilipeled

Gil Peled.

CEO- Expert2IT LTD.

SOPHOS Platinum Partner.

Gil@expert2it.co.Il.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data