Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 1 subscriber
  • Views 2973 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Mail Protection in bridged mode.

FormerMember
FormerMember
Hi there!

I configured the Sophos UTM in bridged mode with Network Protection and that works as a charm. I need to add Mail Protection for spam and virus filtering. I am not sure how to configure that in my briged Sophos. Any advices?


This thread was automatically locked due to age.
Parents
  • 0
    It's preferable to configure the UTM with a public IP and not bridged - is that possible?

    If not, you will want to forward inbound port-25 traffic to the IP of the bridge. 

    Cheers - Bob
    PS I just looked at our last exchange about bridging. If you don't want to assign an IP to your bridge, putting the SMTP into Transparent mode should work. 

    Sorry for any short responses.  Posted from my iPhone.
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    It's preferable to configure the UTM with a public IP and not bridged - is that possible?

    If not, you will want to forward inbound port-25 traffic to the IP of the bridge. 

    Cheers - Bob
    PS I just looked at our last exchange about bridging. If you don't want to assign an IP to your bridge, putting the SMTP into Transparent mode should work. 

    Sorry for any short responses.  Posted from my iPhone.
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML