Help on configuring exchange server to use sophos utm9 as smarthost

Do you have multiple WAN interfaces?

Seems like UTM cannot reach the Destination Mail server via Port 25. 

yes, we have 2 isp at eth6 and eth7

eth7 is where my public ip and mx connected

i dont know if this is significant but i  have a masquerading rule

email server > wan on eth7 > email mx ip

hi all,

after i change the multipath rule

any > smtp > any > mx ip interface

i still cant send and receive mails

when sending it just stuck at smtp pool at mail manager

with message delivery logs

Message Delivery Log:
2018-09-29 08:22:48 gmail-smtp-in.l.google.com [64.233.189.27]:25 Connection timed out
2018-09-29 08:24:55 alt1.gmail-smtp-in.l.google.com [64.233.179.27]:25 Connection timed out
2018-09-29 08:27:02 alt2.gmail-smtp-in.l.google.com [74.125.129.27]:25 Connection timed out
2018-09-29 08:29:09 alt3.gmail-smtp-in.l.google.com [64.233.185.26]:25 Connection timed out
2018-09-29 08:31:16 alt4.gmail-smtp-in.l.google.com [173.194.68.26]:25 Connection timed out
2018-09-29 08:31:16 alewdainc@gmail.com R=dnslookup T=remote_smtp defer (110): Connection timed out

any other ideas?

Then you should test both IP for outgoing port 25 it is blocked or not.

Configure one IP one at a time and from your PC telnet alt4.gmail-smtp-in.l.google.com 25.

So do just only one masquerade for one IP

And tell as the results

After that we can go further and help you with that

Tomorrow I am at work and have plenty of time

You could also try Port 25 from SSH.

https://serverfault.com/questions/295067/invoking-telnet-from-two-different-interfaces

Please show us pictures of the Edits of the relevant configurations, Ryan - SMTP Proxy, Multipath rules, etc.

What information does doing #1 in Rulz give you?

Cheers - Bob

Hi All,

i can now send and receive mails using sophos utm9 as smarthost and currently monitoring the mail flow.

what i did was add a SNAT rule

i dont know if this is the best way to do it, but it works for me.

At first, incoming mails was delayed for about 15 minutes, so i disable Greylisting and BATV at advance anti-spam features. please advise me if this is recommended.

Apparently you did something that function. But who other  sends emails from UTM, because you may compromise your IP and be blackilsted. If no one will be not allowed to send emails,I will suggest another method with multipath rule.

1 Put email Protection in Transparent Mode,  In Realying Tab Allow only Exchange.

2 Having 2 wans both as gateways will enable uplink balancing and multipath rule.  In multipath path rule just follow the instructions above for smtp

Hi oldeda,

1 Put email Protection in Transparent Mode,  In Realying Tab Allow only Exchange.

is this what you are saying?

off topic:

upon monitoring the utm mail manager, i noticed that some of the emails were not delivered to my inbox, but on mail manager it says delivered.

on delivery log

2018-10-05 15:07:24 rquiocho@wdainc.com.ph: static_smtp transport succeeded to (local ip of email server)


On Exchange log

Failed
10/5/2018 3:07 PM email server
The message couldn't be delivered.

250 2.6.0 <cb7d354c-06c2-4d55-a438-a22bce8e6ecc@community.sophos.com> Queued mail for delivery

How you configured the Address Verification on Email Protection. Better to leave with callout.

And check the junk to be sure

hi oldeda,

yes, with call out. i dont think this has something to do with exchange server settings, cause i can receive those mails if i disable the smarthost feature.

nothing on my junk and on mail manager smtp pool.on smtp logs it just says delivered, but nothing appears on my inbox.

i can send and receive mails from yahoo,gmail,hotmail and some other domains.

Do you have a receive connector to in exchange?

I think this has to be done from the scrach

To manny problems here

One more think the emails are not going to exchange or out?

Do you have a receive connector to in exchange?

I think this has to be done from the scrach

To manny problems here

One more think the emails are not going to exchange or out?

yes i have receive connectors.

email server works flawlessly when im not using utm smarthost

but if i add the utm as smarthost, some external mails is not delivered to my outlook inbox

for example the email notification of sophos community did not reach my outlook inbox

but on UTM Mail Manager > smtp logs - i can see that the mail was delivered.

for testing purposes i even add the domain of the sender to exception list to see if it is a filtering issue.

i can send and receive mails to yahoo mail, gmail and hotmail when im using a smarthost

You dont need a receive connector. Try it

Oldeda and I differ on whether one should use Transparent mode.  I'm curious though.  Look at #2 in Rulz.  If you still have an active DNAT rule, it should bypass the SMTP Proxy for inbound emails.  If you see the inbound traffic in the logs or reporting, then that would mean that the traffic is being captured by Transparent.  I bet it's not though and that you will want to disable the DNAT.

Cheers - Bob
PS You will also want to review #5 in Rulz.