Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 6 subscribers
  • Views 6232 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos SG hardware for Fiber

PADDY27

Hi,

I am looking to get a new UTM (SG series) for a fiber connection 100Mb/100Mb. This will be connected to ISP cisco router.

 

What model would be suitable for the fiber link? it will be mainly used for web filtering, network protection, and VPN connections.

 

Regards,



This thread was automatically locked due to age.
  • 0

    Hi 

     

    If you are connected to you cisco router using Ethernet cable you don't need any special hardware and the sizing must be made according to the number of users and the usage.

     

    If you need to use a FC to connect the Sophos SG, you have to first choice is 210 Rev 3 + 1 SFP Module (With SG 550 and 650 you will need a FlexiPort with SFP ports)

     

     

    Regards

  • 0 in reply to OLIVIERMIOSSEC

    Salut Olivier and welcome to the UTM Community!

    Glad to have your participation - I hope you continue to contribute.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0

    Hi,

    if you only go for the 200mb throughput you'll be fine with anything bigger than SG 125.

    if you need to directly connect a fiber link via SFP optics you need to start with SG 210.

    my preference would be sg230 without knowing much about your environment.

     

    Please refer to the Sizing Guide and Datasheet or ask your local Sophos Partner.

    Yours Lukas

    lna@cema

    SCA (utm+xg), SCSE, SCT

    Sophos Platinum Partner

Unfiltered HTML