Thread Info
  • State Suggested Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 10 replies
  • Answers 1 answer
  • Subscribers 9 subscribers
  • Views 14118 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SOPHOS UTM 9.503-4 Home - gaining time

Michael Bryenton

I just upgraded my old firewall (Dell PC) with a Zotac CI327. I installed UTM 9.503.4 and loaded my backup. Everything is running fine but the time gains more than an hour per hour. 

I opened a case with Zotac as well because I don't know if this is a hardware of software issue.

Any ideas?



This thread was automatically locked due to age.
Parents
  • 0

    Dear Michael,

     

    I had the same Problem with a new Zotac ZBox CI327. 

    Solution: insert the following text into /etc/init.d/boot (go to bottom, insert before 'exit 0'!)

     

    echo „tsc“> /sys/devices/system/clocksource/clocksource0/current_clocksource

     

    Works like a charm. However I'm not sure if you have to add the line again after UTM update.

     

    Best regards and happy X-mas

    Michael

Reply
  • 0

    Dear Michael,

     

    I had the same Problem with a new Zotac ZBox CI327. 

    Solution: insert the following text into /etc/init.d/boot (go to bottom, insert before 'exit 0'!)

     

    echo „tsc“> /sys/devices/system/clocksource/clocksource0/current_clocksource

     

    Works like a charm. However I'm not sure if you have to add the line again after UTM update.

     

    Best regards and happy X-mas

    Michael

Children
No Data
Unfiltered HTML