This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Another "is this enough hardware" question

I played with UTM a few years back through work, and we're about to become foster carers, so I now feel the need to control what the home internet connection is used for. I don't want to spend millions - the wife would veto that - but I want something relatively saleable.

The basic idea is that I use my existing Asus router as an access point, then monitor/filter/log everything except traffic from designated MACs/IPs.

I have a 400mbit down 22mbit up internet connection, so I'm conscious that I need to be aware of CPU usage etc.

Load will be various mobile devices, tablets, TVs streaming Netflix etc, a few computers connected by LAN, up to 5 total users.

I'm looking at this:

http://www.mini-itx.com/~JBC420

Only 2 LAN but I will use my existing Asus router as a switch/access point.

The N3160 is Braswell so supports AES-NI etc. I have mSATA SSDs and RAM for it kicking around already.

Is this likely to be a bottleneck?



This thread was automatically locked due to age.
Parents
  • Hi Richard,

    the 3160 chip is good, I have a Zotac CI323 Nano (60Gb SSD/8Gb RAM) box with much the same setup (except that it is a 3150), although I had heard a while ago with problems with the NICs on the Jetway boxes, I am not sure about these issues now (they may well be fixed), I have the home license installed.

    FYI: the other boxes from Zotac don't seem to play well with Sophos (or Linux for that matter).

    Even when I have all the modules running, I don't see it getting much above the 15% mark (on a 40/10 FTTC), and that's when I am streaming 2 HD Videos.

    remember that the Home license only supports 6Gb of RAM.

    XG & UTM Architect (Systems: XG v18 & UTM 9.7 - Virtual, HW & SW)
    Curious enough to take it apart, skilled enough to put it back together, Clever enough to hide the extra parts when I'm Done!

  • Thanks Jason.

     

    The bit that worries me is that if you can hit 15% CPU on 40/10 FTTC, then I might run out of CPU before I run out of bandwidth with 400mbit down (Virgin 350mbit service, which is provisioned at 402mbit on the modem).

    Mind you, I mostly care about hitting max bandwidth on my main desktop and my home server, which I guess I will be excluding from most rules.

    With the home license only supporting 6GB ram, will it not work if I have more (which might mean buying a 2GB stick!) or will it just only use 6GB (which is fine)?

    The LAN PHYs on the model I'm looking at are Intel 211s, so hopefully not going to have issues like I've read the 219s do.

  • Hi Richard,

    if the intel Chips support AMT then there are no LAN drivers included in the UTM iso...

    home License from UTM will use full ram as far as i know... the XG home is limited to 6GB RAM.. not the UTM one.. (anyone correct me if i´m wrong).

    look at the new zotac CI 327 model, it has no Intel LAN Chips and a good cpu in it.. UTM will install on it directly...

     

     

    greets

    zaphod
    ___________________________________________

    Home: Zotac CI321 (8GB RAM / 120GB SSD)  with latest Sophos UTM
    Work: 2 SG430 Cluster / many other models like SG105/SG115/SG135/SG135w/...

  • Ah, that CPU is not going to be man enough though.

    I don't remember having issues with NIC compatibility last time I used Sophos, although it was a while ago. Perhaps I'll have to look at another product, I don't want to spend loads of money on hardware and find it doesn't work.

Reply
  • Ah, that CPU is not going to be man enough though.

    I don't remember having issues with NIC compatibility last time I used Sophos, although it was a while ago. Perhaps I'll have to look at another product, I don't want to spend loads of money on hardware and find it doesn't work.

Children
No Data